Disposable floor mat decoration with how to shop
2023-04-26
Installation environment: the floor installation environment temperature should be controlled at more than 10 degrees Celsius, the relative humidity should not be higher than 80% and not less than 40%, the room is not seepage, rain leakage; Common laminate flooring is not suitable for installation and use in bathrooms, washrooms, saunas and public places with bad environment.
· The moisture content of the ground shall not exceed 20%; otherwise, the ground shall be treated with moisture proof. The moisture proof treatment method can be applied with waterproof coating or laid with plastic film;
· The ground base should have sufficient strength, and its surface quality should conform to relevant provisions of current national standards and norms;
· The ground flatness should meet the pavement requirements. The ground flatness should be measured by 2m ruler, and the maximum chord height between the ruler and the ground should be less than 5mm;
· The negative Angle between the wall and the ground within 200mm shall be perpendicular to each other, smooth and uneven less than 1mm/m, and the part exceeding the error shall be levelled with cement or quick-drying powder; · The surface should be clean and free of debris;
· The cement floor shall be free from cracking;
Installation method:
1, the bottom floor surface must be clean, dry before installation.
2, start in a corner, will have the tape strip side and side of the wall aligned roll and then continue the overlapping part of the tile can be.
3, roll out in the same roll of foam close to the first row, do not overlap foam moisture cushion downward tiling way.
4. Continue the installation. Seal the plastic tape by aggressively gluing all open seams.
5. Install flooring as per manufacturer's instructions.
