The correct use of decoration protective film

Decoration ground protective film is a kind of material used to protect the ground in the decoration process. Also known as moisture-proof film, is an essential material for decoration. With it, there is no need to worry about the ground will be worn; With it, you can rest assured of decoration. So the next small series will introduce the decoration of the ground protective film in detail, and the use of methods.

In the whole process of home decoration, there are many links involved. If the previous construction does not maintain the goods well, it will cause unnecessary trouble to the subsequent construction and use. Spent nearly ten thousand yuan and tens of thousands of yuan of purchase of ceramic tile, has not been finished decoration was damaged, although said that after decoration will do precision cleaning operations, but every owner to see such a bleak situation is not good.

In the process of decoration must use the ground protective film, used under the floor, is the insulation between the floor and the ground, it is laid close to the ground, mainly plays the role of moisture-proof, protect the floor, increase the elasticity and adjust the flatness, can effectively reduce the noise.

5, the installation of transition buckle decoration ground protective film, decoration of essential materials when the length of the room is greater than 10m, the width is greater than 6m, you need to install transition buckle, prevent the ground protective film because of friction and arch.

6, ventilation decoration ground protective film, decoration essential materials after installation pay attention to ventilation, so that the ground protective film as soon as possible firm.

Two, precautions

Before laying the ground protective film, the ground needs to be cleaned up, and the ground protective film can not be too thick, generally about 2mm is good, if too thick, the floor room is larger, a long time is easy to cause the floor arch, cracking.

Decoration of the ground protective film, for everyone to introduce here, the installation steps of the ground protective film: indoor placement, check the level of the ground, paving the ground protective film, four sides left blank, installation of transition buckle, ventilation of these six steps, we have learned? I. Installation steps

1, indoor decoration ground protective film, decoration essential material is best to place the ground protective film in a cool and dry place indoors, do not in direct sunlight.

2, check the floor decoration protective film, decoration is an essential material, which is the initial test part of the installation, the ground measurement, in order to avoid possible hidden dangers.

3, the floor protective film decoration ground protective film, decoration of essential materials from the door to smooth laying of the ground protective film, when the pavement and wet interface connection, such as toilet, kitchen, dark balcony, should be turned up the moisture-proof film, with moisture-proof film wrapped in the side of the floor, prevent moisture from entering, reduce and avoid the discoloration and deformation of the floor. Some ground protective films come with double-sided adhesive tape. When laying, two ground protective films are glued with this adhesive tape, which can ensure the effect of sealing and moisture-proof, and also prolong the service life of the floor.

4, four sides left blank decoration ground protection film, decoration of essential materials must remember to leave four sides blank when laying.